TS1914 - TAV-Link Multi-Sensor
TS1914 - TAV-Link Multi-Sensor
Add to Wishlist

TS1914 - TAV-Link™ Multi-Sensor

$29.99

The TAV-Link™ Multi-sensor detects IR remote signals and motion, using intelligent logic to power down the TV and connected AV electronics if no activity is detected within the countdown period.

This product is currently out of stock and unavailable.

Notify me when this product is in stock

SKU:
Availability: In stock Pre order Out of stock

Adjustable
Countdown Timer

IR Signal Detection

Motion Detection

1. Intelligent Logic Algorithm

The sensor employs an intelligent logic algorithm that prioritizes IR remote signals initially, then checks for both IR and motion.

2. Countdown Timer

Adjustable countdown timer can be set to 30/60/120 minutes for IR signal + motion and 60/120 minutes for IR sensing. If no IR signal or motion is detected within the set countdown timer period, the AV APS+ will power down the TV and other connected AV electronics peripherals.

3. LED Notification

LED notification that flashes when IR activity or motion is detected. Continuous red and blue dual-color flashing LED notification that activates 10 minutes prior to shutdown. Optional buzzer notification that alerts user at 10 minutes and 3 minutes before countdown timer expiration.

4. Supports CEC commands

Supports high-level CEC commands via optional TAV-Link™ cable (sold separately) that allows “smart” TVs, gaming consoles and other devices to safely store their data and settings prior to powering down.

Plug the multi-sensor into the "sensor" port on the side of the power strip.

Plug the TAV-Link cable into an open HDMI port on your TV to enable soft shutdown.

Affix the multi-sensor near the TV's remote sensor using the double-sided tape.

FAQs

Find answers to common questions about our product to help you get the most out of your experience.

How do I set the countdown timer on the sensor?

Press and hold the button for 10 seconds until the red LED lights up. Then press:

  • Once for 30 minutes (IR + motion sensing)
  • Twice for 60 minutes (IR + motion sensing)
  • Three times for 120 minutes (IR + motion sensing)
  • Four times for 60 minutes (IR sensing only)
  • Five times for 120 minutes (IR sensing only)

The LED will flash the number of times indicating the timer duration set.

Can I disable the buzzer notification for countdown timer expiration?

Yes, to disable the audible notification, press and hold the button for 10 seconds until the red LED illuminates. Then press the button six times. The red LED will flash six times to confirm that the countdown timer buzzer has been disabled.

How does the countdown timer work on the multi-sensor for IR-only sensing setting?

The multi-sensor operates a countdown timer of 60 or 120 minutes, during which it continuously monitors for IR signals.

What happens if no IR signal is detected during the countdown period for IR-only sensing setting?

If no IR signal is detected throughout the 60 or 120 minute countdown period, the switched outlets connected to the multi-sensor will switch off automatically.

We work for your success
We love to hear from you on our customer service, merchandise, website, or any topics you want to share with us. Your comments and suggestions will be appreciated. Please complete the form below.